Laser Shaft Alignment - Equipment Hire ServicesSep 16, 2013
If you are looking to hire Laser Shaft Alignment equipment this month then Nicol & Andrew are offering a 10% reduction on their normal hire rates for the rest of November and December 2015.
Users of the best Laser Shaft Alignmnet equipment currently in the marketplace will already know that Fixturlaser products lead the field in ease of use and quality of performance.
Nicol & Andrew Group are keen that as many people as possible can learn about and have access to this amazing shaft alignment equipment and are offering a special discount of 10% during the months of November and December. Mention code OFL12-15.
Currently this will be the Fixturlaser NXA Pro and Evo models which have the unique dual Laser system.
At its launch a few years ago, the Fixturlaser NXA Pro set another new standard for laser based shaft alignment products. With the introduction of new technology in both hardware and software, this alignment tool took a huge innovative technological leap forward with regards to its user friendliness and the once so time consuming task of performing shaft alignment.
The Fixturlaser NXA Pro is a new and improved successor to the Fixturlaser XA with more new features and more streamlining to make your every day maintenance job a lot easier.
Fixturlaser NXA Pro Hardware
As for the hardware, a completely new set of measurement units were introduced, including large 30 mm CCD detector surfaces, which practically eliminates the need for rough alignment. All Fixturlaser shaft alignment products use two measurement units combined with technological features, to dramatically increase the measurement accuracy.
You can sample up to 693 measurements in each position giving in total 2079 points for calculation of any possible misalignment.
Also, the CCD sensors allow for digital signal quality control, further enhancing the measurement accuracy.
To increase the mobility around your work site, the Fixturlaser XA Pro’s shaft alignment units are equipped with Bluetooth units, i.e. a wireless connection. The display unit is one of a kind in the market as it is fitted out with the largest color touch screen available, at 6.4´´.
Fixturlaser NXA Pro Software
The Fixturlaser NXA Pro has an “All Inclusive” shaft alignment software package, which will handle most of the problems that can occur in the machine alignment arena. You will have no unpleasant surprises after purchase with additional charges for e.g. unlimited storage space, machine train alignment, base and bolt bound situations, hot check, etc.
The intuitive user interface is fully animated thanks to the integration of 3D Macromedia Flash technology in the display unit software. It guides you throughout the measurement and alignment process, using color coded icons, symbols, and measurement values, thus eliminating any possible language barriers.
About Nicol & Andrew
Nicol & Andrew is an ISO 9001 2008 certified On Site Machining services provider offering services such as line boring, crankshaft grinding, turbine journal machining and Laser Alignment worldwide.
Nicol & Andrew's mission is to provide worldwide repair services to a very high standard whilst saving the customer time and money by removing the need to remove damaged mechanical equipment to a workshop.
As well as removing metal in a precision manner to allow fitting of undersized bearings etc. they also offer additive processes such as Welding, Metal Spraying and in-situ electroplating. These allow the more easliy available, original size bearings to be used in most cases.
For more information, please visit www.laseralignment.co.uk or contact firstname.lastname@example.org.