Part of the Nicol & Andrew Group

Call 01494 429800  Four Lines

FixturLaser - Professional Laser Alignment
Shafts - Bores - Surfaces

Rectangular Flatness Measurement

Plot rectangular areas with the Fixturlaser NXA Geometry

Rectangular Flatness

This application uses a laser plane as reference. The deviation in distance between the laser plane and the measurement object is measured in one or more positions wit the use of the receiver. The program allows for up to 150 points (10 x 15) to be measured.

Typical applications are measurements of e.g. machine beds and machine foundations. For the latter application, it is particularly beneficial to combine flatness measurement with shaft alignment when installing rotating machinery. First you check the foundation’s surface for possible irregularities, a so called pre-alignment check. If any, adjust these. Install the machine and check for possible misalignment with a laser based shaft alignment tool like the Fixturlaser NXA Ultimate system. Check out our video clip below and see how easy it can be (note that the system used in the video is the Fixturlaser XA)!

Rectangular Flatness Measurement

  Configuration
  • Quick and easy to configure
  • Pre-defined configuration
   
  Measurement
  • Distinct overall view of the measurement
  • Instant display of measurement object’s position
  • Color coded measurement points
  • Measurement points can be registered in any order you prefer
   
  Adjustment
  • Live values during the adjustment phase
  • The angle guide displays the accepted (green) measurement point registration area
  • A green arrow show you in which direction to adjust towards zero
  • Color coded measurement values